0.2mm - 2.5mm:سمك
no more than 580mm:العرض
C11000 (T2) :المواد
Thickness: 0.2mm - 2.5mm
Width: no more than 580mm
Material: C11000 (T2)
مواصفات النحاس يرتدون / الصلب المطلي الشريط:
النحاس الصف: c11000 (t2)
النحاس الصف: c27000 (h65)، c22000 (h90)
العرض: T2 (النحاس): w≤580mm
سمك: 0.2mm - 2.5mm
التسامح من سمك (Δ1):
δ≤0.5mm، Δ1 = 0.04mm
1.0mm≥δ> 0.5mm، Δ1 = 0.06mm
δ> 1.0mm، Δ1 = 0.08mm
6. العرض: t2 (النحاس): w≤580mm
H65 (النحاس): w≤450mm
تسامح العرض (Δ2):
w≤200mm، Δ2 = 0.5mm
400mm≥w> 200mm، Δ2 = 0.8mm
w> 400mm، Δ2 = 1.0mm
القطر الداخلي لفائف: 508mm / 250mm / 100mm
خارج القطر لفائف: لا يزيد عن 1400mm
طول ورقة: 450mm ~ 800mm
النحاس الصلب قطاع مركب:
المواد يرتدون: النحاس h90 / c22000 / CZ101
المواد البدروم: الكربون الصلب المشترك / Q195
سمك: 0.2mm-2.0mm
العرض: 25mm-470mm
المزاج: كما هو مطلوب
التطبيقات: رصاصة قذيفة؛ الديكور الداخلي؛ عملات لعبة، وما إلى ذلك.
Specifications of Copper Clad/Coated Steel Strip:
Copper Grade: C11000 (T2)
Brass Grade: C27000 (H65), C22000 (H90)
Width:T2(copper): w≤580mm
Thickness: 0.2mm - 2.5mm
Tolerance of Thickness (Δ1):
δ≤0.5mm, Δ1=0.04mm
1.0mm≥δ>0.5mm, Δ1=0.06mm
δ>1.0mm, Δ1=0.08mm
6. Width:T2(copper): w≤580mm
H65(Brass): w≤450mm
Tolerance of Width (Δ2):
w≤200mm, Δ2=0.5mm
400mm≥w>200mm, Δ2=0.8mm
w>400mm, Δ2=1.0mm
Inner Diameter for Coil: 508mm/250mm/100mm
Outside Diameter for Coil: no more than 1400mm
Length for Sheet: 450mm~800mm
Clad material: brass H90/C22000/CZ101
Basement material: common carbon steel/Q195
Thickness: 0.2mm-2.0mm
Width: 25mm-470mm
Temper: as required
Applications: bullet shell; interior decoration; game coins, etc.
التركيب الكيميائي
Chemical Composition:
التعبئة والتغليف شريط الفولاذ المطلي بالنحاس
يتم تعبئه منتجات شركة شنغهاي للمعادن وفقا للوائح وطلبات العملاء
وتؤخذ عناية كبيرة لتجنب أي ضرر قد يكون السبب أثناء التخزين أو النقل
وبالإضافة إلى ذلك، يتم وضع علامات واضحة على الخارج لسهولة تحديد المنتج ونوعية جودة المعلومات.
1) تعبئة حسب معيار شركة شنغهاي للمعادن
2) تعبئة حسب طلب الزبائن
Packaging of Copper Steel Composite Strip:
Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)SMC Standard
2)Customization
تطبيقات شريط الفولاذ المطلي بالنحاس
الرصاصة
الخراطيش
قطعة المختوم الكتروني
الأجهزة الإلكترونية
الديكور
مبرد الحرارة
الأجزاء المسحوبة العميقة
أجزاء التغطية
الموصلات
مبدلات الحرارة
رأس الصلة لـUSB
رقائق الاتصال للزينة
عملية إنتاج شريط الفولاذ المطلي بالنحاس
قبل كل شىء، نحن نستخدم ورقة الرمل لتلميع سطح النحاس والفولاذ. ثم نستخدم مطحنة 130 تون ليضغط حتى يلصق النحاس مع الفولاذ، والخطوة التالية نستخدم أفران الصلب لترجيع النار. وأخيرا، نستخدم آلات الحز يشقها إلى الشرائط بالعرض المحدود.
Applications of Copper Clad/Coated Steel Strip:
1) Bullets
2) Cartridges
3) Electronic stamping
4) Electronic hardware
5) Decoration
6) Radiators
7) Drawing parts
8) Covering parts
9) Connectors
10) Heat Exchanger
11) USB Interfaces
12) Decorative Contact Chips
Manufacturing of Copper Clad/Coated Steel Strip:
We use sand paper to polish the surface of copper and steel. Then, mill imposes 130T pressure on the copper and steel to make them cohesive. Next step is the anneal procession, in which big annealing furnaces are applied. Finally, slitting machines slit large coils into the strips you want.
سوف نتصل بك في غضون 8 ساعات