الأسطح والأسقف

لفائف الفولاذ المجلفن على الساخن للسقف

    0.12mm-5.0mm:سماكة

     

     600mm-1500mm:عرض

     

     

    30g/m2-600g/m2:طلاء او غلاف الزنك

    thickness: 0.12mm-5.0mm

     

    Width: 600mm-1500mm

     

    Zinc Coating: 30g/m2-600g/m2

:المقدمة
لفائف الصلب المجلفن هو نوع خاص من لفائف الصلب المستخدمة في عدد من التطبيقات المختلفة. لفائف الصلب من أي نوع هو الأسهم المسطحة التي هي رقيقة بما فيه الكفاية ليتم تدحرجت في لفائف أو الجرح في لفة مستمرة. كما أنها قادرة على أن يتم طرحها مسطحة وقطع في أي طول أو شكل اللازمة. وجود لفائف الصلب المجلفن يساعد المستخدم عن طريق السماح لتطبيقه في تطبيق نظام التسقيف.


مواصفات تراجع الساخنة المجلفن لفائف الصلب:
1) القدرات: حوالي 15000 طن شهريا ل صفائح الصلب و لفائف المنتج
2) الصف: سغك، سغك، DX51D، Q195، كل وفقا لطلب الزبون
3) معيار: جيس G3302 1998، أستم A653M / A924M 2004، كل وفقا لطلب الزبون
4) سمك: من 0.12mm إلى 5.0mm، كل ما هو متاح
5) العرض: من 600mm إلى 1500mm، كل ما هو متاح
6) معرف الملف: 508mm / 610mm
7) لفائف الوزن: من 2-10MT، وفقا لطلب الزبون
8) الزنك طلاء الوزن: 30g / m2-600g / m2، ضعف الجانب
9) سبانغل: كبير سبانغل، العادية سبانغل، صغير سبانغل، صفر سبانغل
10) المعالجة السطحية: كرومات، الزيوت، باسيفاتينغ + زيوت
11) حافة: مطحنة حافة، قطع الحافة
12) دقيقة محاكمة النظام 10 طن لكل سمك، 1x20 'في التسليم


13) المعالجة السطحية من تراجع الساخنة المجلفن لفائف الصلب:

Introduction: 
Galvanized steel coil is a special type of steel coil used in a number of different applications. Steel coil of any kind is flat stock that is thin enough to be rolled into a coil or wound into a continuous roll. It is also able to be rolled out flat and cut at any length or shape needed. Having the steel coil galvanized helps the user by allowing it to be applied in roofing system application.

Specification of Hot Dip Galvanized Steel Coil:
1) Capacity: about 15000 tons per month for the steel sheet and coil product
2) Grade: SGHC, SGCC, DX51D, Q195, all according to the customer's request
3) Standard: JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer's request
4) Thickness: from 0.12mm to 5.0mm, all available
5) Width: from 600mm to 1500mm, all available
6) Coil ID: 508mm/610mm
7) Coil weight: from 2-10MT, according to the customer's request
8) Zinc coating weight: 30g/m2-600g/m2, double side
9) Spangle : big spangle, regular spangle, small spangle, zero spangle
10) Surface treatment: Chromated, oils, passivating + oils
11) Edge: mill edge, cut edge
12) Min trial order 10 ton each thickness, 1x20' per delivery 

13)Surface Treatment of Hot Dip Galvanized Steel Coil:


14)Spangle of Hot Dip Galvanized Steel Coil:


15) الميزات: تراجع الساخنة الصلب المجلفن يتميز خصائص تشكيل ممتازة، بينتابيليتي، اللحام، ومناسبة لتصنيع عن طريق تشكيل والضغط والانحناء. بل هو أيضا صديقة للبيئة الموارد بسبب طول العمر في حماية التآكل، منخفضة التكلفة البيئية، و 100٪ إعادة التدوير.
16) صفات المنتج:
> سك - الجودة التجارية الصلب للتطبيقات الهيكلية
> سك - الهيكلية الجودة الصلب للتطبيقات التي تحتاج إلى مزيد من القدرة التعادل
> لفق - قفل تشكيل الجودة
> دق - جودة الرسم
> دق - جودة الرسم العميق

15) Features: Hot dip galvanized steel features excellent forming properties, paintability, weldability, and is suitable for fabrication by forming, pressing and bending. It is also Environmental Friendly resource because of its longevity in corrosion protection, low environmental cost, and 100% recyclability. 
16)  Product qualities:
>CQ - Commercial Quality steel for structural applications
>SQ - Structural Quality steel for applications that need more draw ability
>LFQ - Lock Forming Quality
>DQ - Drawing Quality
>DDQ - Deep Drawing Quality


※ درجة أخرى: S220GD + Z، S250GD + Z، S280GD + Z، S320GD + Z، S350GD + Z، S550GD + Z

 

※ سمك: من 0.25mm إلى 3.0mm، كل ما هو متاح

 

※ العرض: إلى 1300mm، كل ما هو متاح

 

الوضعية:

 

 لفائف الصلب المجلفن أن معظم عمال البناء تستخدم غالبا ما تكون موجودة في تطبيقات التسقيف. هناك، يتم استخدامه كغطاء واقية أو حاجز فوق التلال والوديان في نظام السقف. يتم لفائف لفائف مسطحة على السطح، وعازمة إما على قمة التلال أو في تجعد في واد، لحماية التماس في الأغطية السطح من التعرض للعناصر. كما أنه يخلق مستجمعا مائيا لجريان مياه الأمطار وذوبان الثلوج أو الجليد.

 

مخطط تدفق العملية:

 

 

دفع قبالة بكرة → قطع قص مزدوج → لحام-الجزار → تراكم دخول → قسم التنظيف قبل → فرن → حار اللجام → الزنك وعاء → سكين الهواء → بعد برودة → إرواء المياه → مجفف → الجلد تمرير مطحنة → مجفف → التوتر مستوي → مجفف → الكيميائية المغطي → الكيميائية الفرن → برودة → خروج تراكم → مزيتة → القص خروج → التوتر بكرة.

※Other Grade: S220GD+Z, S250GD+Z, S280GD+Z, S320GD+Z, S350GD+Z, S550GD+Z

※Thickness: from 0.25mm to 3.0mm, all available

※Width: to 1300mm, all available

Application:

 The galvanized steel coil that most construction workers use is often found in roofing applications. There, it is used as a protective cover or barrier over ridges and valleys in the roof system. The coil is rolled out flat on the roof, and bent either over the top of a ridge or into the crease in a valley, to protect the seam in the roof’s sheeting from exposure to the elements. It also creates a watershed for the runoff of rain and melting snow or ice.

Process Flow Diagram:

 

Pay off reel → double cut shear → welder-notcher → entry accumulator → pre cleaning section → furnace → hot bridle → zinc pot → air knife → after cooler → water quench → dryer → skin pass mill → dryer → tension leveler → dryer → chemical coater → chemical oven → cooler → exit accumulator → oiler → exit shear → tension reel.

معلومات التغليف من تراجع الساخنة لفائف الصلب المجلفن:

 

 

شنغهاي المنتجات المعدنية هي معبأة و المسمى وفقا للوائح و طلبات العملاء. تؤخذ عناية كبيرة لتجنب أي ضرر قد يكون سبب أثناء التخزين أو النقل. وبالإضافة إلى ذلك، يتم وضع علامات على تسميات واضحة على الخارج من الحزم لسهولة تحديد المنتج I. D. ونوعية المعلومات.

Packaging Information of Hot Dip Galvanized Steel Coil:

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

تطبيق تراجع الساخنة المجلفن لفائف الصلب:

 

1. البناء والبناء: تسقيف؛ التهوية لاصق؛ درابزين؛ لوحة التقسيم، الخ.

 

2.Further تجهيز: طلاء قاعدة لوحة

 

3. الأجهزة الكهربائية: ثلاجة؛ غسالة؛ مسجل. الميكروويف، الخ.

 

 

 

ما هو الصلب المجلفن؟

 

هناك نوعان من الطرق الجلفنة نموذجية للحصول على طلاء الزنك: تراجع الساخنة الجلفنة و إلكتروجالفانيزينغ. تراجع الساخنة الجلفنة هي العملية التي يتم مغمورة الصلب في الحمام الزنك المنصهر للحصول على سطح طلاء الزنك. هذا ليس فقط يساعد على حماية الصلب من الصدأ والتآكل، ولكن أيضا يعطي الصلب مظهر جذاب لامعة. إلكتروجالفانيز هو العملية التي تستخدم التحليل الكهربائي لمعطف الصلب مع الزنك، وهي ليست فعالة من حيث التكلفة ولا صديقة للبيئة. فمن الصعب العثور على الصلب بالكهرباء في حياتنا في الوقت الحاضر.

 

ما هي مزايا الصلب المجلفن؟

 

بسبب طبقات سبائك الزنك / الحديد بشكل دائم ومتتابع، الفولاذ المجلفن يقدم فوائد كثيرة من الفولاذ التقليدي.

 

>> مقاومة التآكل: سطح طلاء الزنك يحمي قاعدة الصلب ليس فقط من خلال توفير حاجز لعناصر التآكل، ولكن أيضا من قبل الطبيعة الأضاحي للطلاء. الصلب المجلفن غالبا ما يبقى في العمل مع القليل من الصيانة لمدة 40 عاما أو أكثر.

 

>> مظهر السطح ممتازة

 

>> قابلية التشكيل: يمكن أن يكون ببساطة ينحني إلى أجزاء مع متطلبات الرسم العميق.

 

>> بينتابيليتي: يمكن رسمها بألوان مختلفة.

 

>> قابلية اللحام: فمن المقبول مختلف ممارسات اللحام.

 

ما هي عيوب الصلب المجلفن؟

 

على الرغم من العديد من الفوائد، الصلب المجلفن ليس دائما خيارا مثاليا. الصلب المجلفن لا يمكن أن تستخدم تحت الأرض دون تغطية بشكل صحيح، والتي يمكن أن تكون غير مريحة للعديد من الوظائف.

 

أين نستخدم الصلب المجلفن؟

 

 

وهي تستخدم في المقام الأول في صناعة البناء والتشييد، مثل تسقيف، جدار الكسوة، ودعم الحزم. كما أنها تستخدم في صناعة السيارات، ويرجع ذلك إلى تعزيز بينتابيليتي، قابلية اللحام ومقاومة التآكل. وعلاوة على ذلك، فإنه هو مادة أساسية لتطبيق السلع البيضاء، مثل الثلاجات ومكيفات الهواء والغسالات وأجهزة الميكروويف، وآلات البيع والنظم السمعية والبصرية.

Application of Hot Dip Galvanized Steel Coil:

1.Construction and building: roofing; ventilating duct; handrail; partition panel,etc.

2.Further processing: coating base plate

3.Electric appliance: Refrigerator; washing machine; recorder; microwave, etc.

 

What is Galvanized Steel?

There are two typical galvanizing ways to obtain a zinc coating: hot dip galvanizing and electrogalvanizing. Hot dip galvanizing is the process that steel is immersed into molten zinc bath to get a zinc coating surface. This not only helps protect steel from rust and corrosion, but also gives the steel a shiny attractive appearance. Electrogalvanizing is the process that uses electrolysis to coat the steel with zinc, which is neither cost-effective nor environmentally friendly. It is hardly to find electrogalvanized steel in our lives nowadays.

What are advantages of galvanized steel?

Because of permanently and successive zinc/iron alloy layers, galvanized steel offers many benefits than traditional steels. 

>>Corrosion Resistance: the zinc coating surface protects the base steel not only by providing barrier to corrosion elements, but also by the sacrificial nature of the coating. Galvanized steel often remains in working order with little maintenance for 40 years or more.

>>Excellent Surface Appearance

>>Formability: it can be simply bend to parts with deep drawing requirements.

>>Paintability: it can be painted with different colors.

>>Weldability: it is accepted various welding practices.

What are disadvantages of galvanized steel?

In spite of many benefits, galvanized steel is not always an ideal choice. Galvanized steel cannot be used underground without properly covered, which can be inconvenient for many jobs.

Where do we use galvanized steel?

 

It is primarily used in the construction industry, such as roofing, wall cladding, and support beams. It is also used in the automotive industry, due to its enhanced paintability, weldability and corrosion resistance. Moreover, it is an essential material for white goods application, such as refrigerators, air-conditioners, washers, microwaves, vending machines and audio visual systems.

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح