قطع غيار الآلات والمعدات ومستلزماته

ورقة الفولاذ المجلفنة على الساخن لغطاء حفرة مستديرة

     0.13mm-4.0mm:سماكة

     

    600mm - 1250mm:عرض

     

     

    طول: أقل من 12 مترا

     

    Thickness: 0.13mm-4.0mm

     

    Width: 600mm - 1250mm

     

    Length: Less than 12 meters

مواصفات تراجع الساخنة المجلفن ورقة الصلب (جي ورقة):
1. القدرات: حوالي 15،000 طن شهريا ل صفائح الصلب و لفائف المنتج
2. الصف: سغك، DX51D، Q195، كل وفقا لطلب الزبون
3. القياسية: جيس G3302 1998، أستم A653M / A924M 2004، كل وفقا لطلب الزبون
4. سمك: 0.13mm - 4.0mm، كل ما هو متاح.
5. العرض: 600mm - 1250mm، كل ما هو متاح.
6. معيار الحجم: 3'x6 '، 4'x4'، 4'x5 '، 4'x6'، 4'x8 '، 5'x10'، الخ
7. استطالة: دقيقة. 7٪
8. الزنك طلاء الوزن: 60 جرام / m2-600 جرام / m2 (z180، z200، z275، z275، z300)
9. الشد: 28.1 - 49.2kgf / mm2
10. حافة: مطحنة حافة، قطع الحافة
11.Types من المجلفن الصفائح المعدنية: (جميع أنماط لدينا هي العرف المصنعة.)

Specification of Hot Dip Galvanized Steel Sheet (GI Sheet):
1. Capacity: about 15,000 tons per month for the steel sheet and coil product
2. Grade: SGCC, DX51D, Q195, all according to the customer's request
3. Standard: JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer's request
4. Thickness: 0.13mm - 4.0mm, all available.
5. Width: 600mm - 1250mm , all available.
6.Standard Size: 3'x6', 4'x4', 4'x5', 4'x6', 4'x8', 5'x10', etc
7. Elongation: Min. 7%
8. Zinc coating weight: 60g/m2-600g/m2 (z180, z200, z275, z275, z300)
9. Tensile strength: 28.1 - 49.2kgf/mm2
10. Edge: mill edge, cut edge 
11.Types of Galvanized Sheet Metal: (all of our patterns are custom-manufactured.)



12.Surface Treatment:

 
13.Spangle:



:(أنواع مختلفة من تراجع الساخنة المجلفن ورقة الصلب (جي ورقة
ونحن قادرون على جعل ورقة المجلفن لمزيد من بروسسينغ، مثل تنقش الصفائح المعدنية، المدقق الصلب ورقة، مثقب الصلب والمعادن، المموج ورقة السقف، و بريباينتد المجلفن الصلب ورقة. نحن نقدم أنماط مختلفة لتلك الأنواع المختلفة. يرجى مراجعة الجدول أنواع الصفائح المعدنية أدناه. جميع أنواع الصفائح المعدنية هي مانفاكتوريد العرف.

Different Types of Hot Dip Galvanized Steel Sheet (GI Sheet):
We are able to make galvanized sheet to further processsing, such as embossed sheet metal, checker steel sheet, perforated steel metal, corrugated roof sheet, and prepainted galvanized steel sheet. We provide various patterns for those different types. Please check the metal sheet types's table below. All of our metal sheet types are custom-manfactureed.  


:شنغهاي المعادن شركة معيار ورقة قياس المعادن

Shanghai Metal Corporation Standard Sheet Metal Gauge:


 


:(التعبئة والتغليف ل تراجع الساخنة المجلفن ورقة الصلب (جي ورقة

 

 

شنغهاي المنتجات المعدنية هي معبأة و المسمى وفقا للوائح و طلبات العملاء. تؤخذ عناية كبيرة لتجنب أي ضرر قد يكون سبب أثناء التخزين أو النقل. وبالإضافة إلى ذلك، يتم وضع علامات على تسميات واضحة على الخارج من الحزم لسهولة تحديد المنتج I. D. ونوعية المعلومات.

Packaging for Hot Dip Galvanized Steel Sheet (GI Sheet):

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

:(تطبيق تراجع الساخنة المجلفن ورقة الصلب (جي ورقة

 

1. البناء والبناء: تسقيف؛ التهوية لاصق؛ درابزين؛ لوحة التقسيم، الخ.

 

2. معالجة إضافية: طلاء قاعدة لوحة

 

3. الأجهزة الكهربائية: ثلاجة؛ غسالة؛ مسجل. الميكروويف، الخ

 

تتكون عملية تشكيل منتجات الصلب المدلفن من ثلاث خطوات أساسية: إعداد السطح، الجلفنة والتفتيش.

 

يتكون إعداد السطح من ثلاث خطوات: إزالة الشحوم، حمض التخليل والتدفق.

 

الجلفنة مغمورة تماما في حمام الزنك المنصهر 

 

 

ويمكن إجراء مجموعة متنوعة من الفحوص الفيزيائية والمخبرية البسيطة لتحديد السمك والتوحيد والالتزام والمظهر.

Application of Hot Dip Galvanized Steel Sheet (GI Sheet):

1.Construction and building: roofing; ventilating duct; handrail; partition panel,etc.

2.Further processing: coating base plate

3.Electric appliance: Refrigerator; washing machine; recorder; microwave, etc.


The GALVANIZED STEEL SHEET PRODUCTS forming process consists of three basic steps: surface preparation,galvanizing and inspection.

Surface preparation consists of three steps: degreasing, acid pickling and fluxing.

Galvanizing is completely immersed in a bath of molten zinc.

 

A variety of simple physical and laboratory tests may be performed to determine thickness,uniformity,adherence, and appearance.

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح