خلط نيكل هستلوي

X هاستلوني فئة

     

    0.01-10mm :الأسلاك

     0.05*5.0-5.0*250mm:الأشرطة

    4-50mm القضبان: القطر الخارجي

    ، 6-273mm الأنابيب: القطر الخارجي

    ،  1-30mm السماكة

    .1000-8000mm الطول

    Wire: 0.01-10mm


    Strip: 0.05*5.0-5.0*250mm


    Bar: OD 4-50mm;


    Pipe: OD 6-273mm, thickness 1-30mm; Length 1000-8000mm 


 

:Xمنتجات فولاذ الهاستلوي 

: أسماء أخرى شائعة 

        4722 الميكرفير HX النيكل فاكX السبائك X النيكك

X ايكونيل HXالتمبت

UNS N06002; DIN W. Nr. 2.4665 :التصميمات المتكافئة

:المواصفات

0.01-10mm:الأسلاك

0.05*5.0-5.0*250mm:الأشرطة

4-50mm القضبان: القطر الخارجي

6-273mm الأنابيب: القطر الخارجي

،  1-30mm السماكة

.1000-8000mm الطول

 0.8-36mmالألواح : السماكة

650-2000mm العرض

 و غيرها من التشطيبات الأخرىbAتشطيب السطح: اللون الأسود، الصقل اللأمع، الخراطة الخشنة، التشطيب رقم 4، الصقل الغير لامع، التشطيب فئة





Hastelloy X steel products:

Common Other Names: 
Nickel X, Alloy X, Nickelvac HX, Microfer 4722, Altemp HX, Inconel HX.
Equivalent designations: UNS N06002; DIN W. Nr. 2.4665
Specification:
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: OD 4-50mm;
Pipe: OD 6-273mm, thickness 1-30mm; Length 1000-8000mm

Sheet: Thickness 0.8-36mm; Width 650-2000mm

Surface Treatment: Black, Bright polished, Rough Turned, No 4 Finished, Matt Finished, bA Finished, or other Finished


: قائمة بالمنتجات والمعايير

Product list and standard:



: العناصر الكيميائية للصهر الذاتي الحركة

Chemical element for automotive fuse:

 

 

Physical properties:

 

 






 

:طرق المعالجة

المواد الخام _ الصهر_ السحب_ التلدين__ المنتج النهائي_ الكشف على المنتج_ الحزمة_ الترحيل

Processing method: 


Raw material→ Smelting→ Drawing→ Rolling→ Annealing→ Finished product→ Detection→ Packing→ Shipping

 

إن منتجاتنا معبأة وفق للوائح والقوانين المتفق عليها وعلى حسب متطلبات العميل

.  حيث تؤخذ عناية كبيرة لتجنب أي ضرر قد يلحق بها أثناء التخزين أو النقل

وبالإضافة إلى ذلك، يتم وضع علامات تعرفية  واضحة على المنتج من الخارج  لسهولة تحديد المنتج

Shanghai Metal معايير

التخصيص على حسب طلب العميل 

Packing: 

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation.

In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

1)Shanghai Metal Standard

2)Customization

 

: التطبيقات

توربينات الغاز

الصناعات البتروكيماوية

 الأفران الصناعية

معدات المعالجة الحرارية

الهندسة النووية

غرف الإحتراق بالمحركات الصاروخية

ساخنات المقطورات في الطائرات

مكونات الإجهاد في التوربيانات

Applications: 

Gas turbines

Petrochemical industry

Industrial furnaces

Heat treating equipment

Nuclear engineering

Jet engine combustion chambers

Aircraft cabin heaters

Turbine exhaust components

 

 


، من اكثر سبائك النيكل الأساسية التي تستخدم بشكل واسع في غرف الإحتراق في توربيان العاز مثل قنوات الإنتقال،علب الإحتراق، قضبان الرش وحاملات اللهب تماماً مثل ما بعد المحراق Xإن الهاستلوني من الفئة 

.(مواسير السحب، وساخنات المقطورات.حيث ينصح بإستخدامها في تطبيقات الأفران الصناعية ويعزى ذلك للمقاومتها الغير معتادة للأكسدة، و الحد من الأجواء المتعادلة( الغير مختزلة والغيرمؤكسدة

يستخدم الهاستلوني أيضاً في صناعة  المعالجة الكيميائية للانايبب المعوجة،الصمامات،المحفزات الداعمة للإلكترودات المصبعية،عارضات الأفران،أنابيب للعمليات التحليل بالحرارة ومكونات المجففات الوامضة 

Hastelloy X is one of the most widely used nickel base superalloys for gas turbine engine combustion zonecomponents such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. It is recommended for use in industrial furnace applications because it has unusual resistance to oxidizing, reducing and neutral atmospheres. 

Hastelloy X is also used in the chemical process industry for retorts, muffles, catalysts support grids, furnace baffles, tubing for pyrolysis operations and flash drier components.

 

:المميزات

.هي سبائك من النيكل_الكروم_ الحديد_الموليديوم_ مع مقاومة عالية للاحوال الجوية والأكسدة  بالإضافة إلى قابلية التصنيعX إن الهاستلوني فئة 

 2200°F المقاومة للاكسدة ممتازة للغاية حيث تصل قدرتها على إلى X السبائك من الفئة 

سبائك النيكل هذه يمكن ان تجدها مقاومة للضغط والتشققات في التطبيقات البتروكيماوية.تزودك بدعامات للصب بواسطة نتائج محتوى الموليدينوم ذات القوة العالية في سبائك محاليل _جامدة ذات خصائص تصنيع جيدة. على الرغم من ان سبائك النيكل  من المعروف عنها انها مقامة للحرارة والأكسدة هي أيضاً لديها قدرة للمقاومة للتشققات الناجمة عن مقاومة الضغط والكلوريد، الكربنة ، وهي مقاوم رائع ومخفض للأجواء المكربنة. هنالك إثنين من الظروف الشائعة عادة ما تؤدي لفشل المبكر للسباك  وذلك في الأحوال الجوية ذات درجات الحرارة المرتفعة، والعالية الكربون والنتروجين


Advantages:

Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. Alloy X’s oxidation resistance is excellent up to 2200°F. This nickel steel alloy has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Matrix stiffening provided by the molybdenum content results in high strength in a solid-solution alloy having good fabrication characteristics. Although this nickel alloy is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres. Two common conditions that often lead to early failure in high temperature alloys, carburization and nitriding.

 لديها  خواص عالية للتشكيل واللحام. يمكن طرقها وتشكيلها وذلك بسبب ماتمتاز به من قوة سحب ، كما يمكن العمل عليها وهي باردة. يمكن ان تلحم بالطرق االتقليدية و الطرق الاتوماتيكيةXإن سبائك الهاستلوني من الفئة

(1175°C) 2150°F يضم ذلك أقواس المعادن المصفحة ،أقواس الغاز التنغستينية وعمليات الأقواس المغطسة. هذه السبائك يمكن أن تقاوم اللحام، بالنسبة للتشكيل الحار يجب ان تسخن السبائك بدرجة حرارة مبدئية 

Hastelloy X has excellent forming and welding characteristics. It can be forged and, because of its good ductility, can be cold worked. It can be welded by both manual and automatic methods including shielded metal arc, gas tungsten arc, gas metal arc and submerged arc processes. The alloy can also be resistance welded. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C).

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح