ASTM,ASME,EN,JIS، معيار: الخ
حجم: حسب طلب العملاء
التطبيقات: البتروكيماويات، الصيدلانية، السيارات والخ
Standard: ASTM,ASME,EN,JIS,etc.
Size: As customers' request.
Applications: Petrochemical, Pharmaceutical, Automobile,etc.
Clad Steel Plate is a composite steel plate made by bonding stainless steel plate, etc.
(cladding material) to either or both sides of carbon steel or low alloy steel plate (base metal).
The materials mostly composite carbon steel plate and stainless steel plates. Clad steel plate mainly used in anti-corrosion, pressure vessels manufacturing, electrical
:ميزات اللوحة الفولاذية المركبة
قوة كافية
مقاومة للحرارة
مقاومة التآكل
تطبيقات مجموعة واسعة
Features of Clad Steel Plate:
>Sufficient strength
>Heat resistance
>Corrosion resistance
Specifications of Clad Steel Plate:
المعايير التنفيذية
1. Executive Standards:
لوحة ملتفة ملحومة بالمفرق ولوحات صفائح ملتوية
2. Explosion-welded clad plate & Roll-bonded clad plates
تركيبات كيميائية اللوحة الفولاذية المركبة
Chemical Compostions of Clad Steel Plate:
تطبيقات اللوحة الفولاذية المركبة
بتروكيماويات
دليل
الصناعات الخفيفة
سيارات
استخدام المضادة للتآكل
تصنيع الأوعية الضغط
البناء الكهربائية
المبادلات و أنابيب الزعانف
معدات لمعالجة مياه الصرف الصحي و إزالة الكبريت من غاز المداخن
إلخ
Applications of Clad Steel Plate:
>Petrochemical,
>Pharmaceutical,
>Light industry,
>Automobile,
>Anti-corrosion usage,
>Pressure vessels manufacturing,
>Electrical construction,
>Exchangers and finned tubes,
>Equipments for waste water treatment and flue-gas desulfurization
Etc.
:تجهيز اللوحة الفولاذية المركبة
معالجة إندستيل لوحات ملتفة لا تقدم أي صعوبة خاصة مع الأخذ بعين الاعتبار كل من دعم والمواد الكسوة. يجب أن تكون المعدات المستخدمة في اتصال مع الكسوة نظيفة للحد من خطر تلوث المواد الكسوة. وترد التعليمات العامة في كتيب "تشكيل اللوحة الفولاذية المركبة" وتعليمات مفصلة متوفرة من الخدمات الفنية لدينا لأوامر صفائح محددة يرتدون. عند الطلب، يمكن أن تقدم إندستيل منتجات سابقة التجهيز مثل الرؤوس والأقراص والألواح المحضرة، إلخ
Processing of clad plates:
Processing INDUSTEEL clad plates does not present any particular difficulty taking into consideration both the backing and the cladding material. The equipment used in contact with the cladding must be clean to limit the risk of contamination of the cladding material. General instructions are given in the brochure "Forming and welding clad plates" and detailed instructions are available from our technical services for specific clad plates orders. Upon request, INDUSTEEL can offer prefabricated products such as heads, discs, edge prepared plates, etc…
سوف نتصل بك في غضون 8 ساعات