0.3mm-1.2mm:سماكة
40g/m2-150g/m2:طلاء او غلاف الزنك
25mic/5-10mic:سمك اللوحة
Thickness: 0.3mm-1.2mm
Zinc Coating: 40g/m2-150g/m2
Painting Thickness: 25mic/5-10mic
:مواصفات بم الصلب
1) سمك: 0.3mm-1.2mm
2) طلاء الزنك: 40g / m2-150g / m2
3) سمك اللوحة: 25mic / 5-10mic
4) العرض القياسية: 914mm، 1000mm، 1200mm، 1270mm أو حسب الطلب.
5) لفائف الوزن: حسب الطلب.
6) إد: 508mm / 610mm
7) اللون: رال، أو سلسلة أخرى
8) يثبت 180 درجة الانحناء
:عملية التصنيع من بم الصلب
دفع قبالة بكرة → قطع قص مزدوج → لحام-الجزار → تراكم دخول → قسم التنظيف قبل → فرن → الساخن اللجام →
الزنك وعاء → الهواء سكين → بعد برودة → إرواء المياه → مجفف → الجلد تمر مطحنة → مجفف → التوتر مستوي → مجفف →
الكيميائية كواتر → الكيميائية فرن → برودة → خروج تراكم → مزيتة → القص خروج → التوتر بكرة.
معدات مختارة لا غنى عنها للجودة العالية، وقد تم استيراد معدات مطحنة الدرفلة المعدنية من شنغهاي من سمز ديماغ من ألمانيا ومن إيطاليا
نادرة جدا كانت أي شركات محلية لامتلاك مرافق معالجة متقدمة دنيوية. التخليل، وتجديد حمض، وتراجع الساخنة خطوط الجلفنة مطابقة
يتم شراء مطحنة الباردة أيضا من الشركات المحلية المعروفة. وقد وضعت هذه معدات الإنتاج المتقدمة بالتأكيد أساسا متينا لإنتاج
منتجات متفوقة
Specification of PCM Steel:
1) Thickness: 0.3mm-1.2mm
2) Zinc Coating: 40g/m2-150g/m2
3) Painting Thickness: 25mic/5-10mic
4) Standard Width: 914mm, 1000mm, 1200mm, 1270mm or by request.
5) Coil weight: by request.
6) ID: 508mm/610mm
7) Color: RAL, or other series
8) Coating sustains 180 degree bending
Manfacturing Process of PCM Steel:
Pay off reel → double cut shear → welder-notcher → entry accumulator → pre cleaning section → furnace → hot bridle →
zinc pot → air knife → after cooler → water quench → dryer → skin pass mill → dryer → tension leveler → dryer →
chemical coater → chemical oven → cooler → exit accumulator → oiler → exit shear → tension reel.
Selected equipment is indispensable for superior quality. Shanghai metal cold rolling mill equipment was imported from SMS Demag of Germany and from Italy.
So rare were any domestic companies to own so worldly advanced processing facilities. The pickling, acid regeneration, and hot-dip galvanizing lines matching
the cold mill are also purchased from well-known domestic companies. These advanced production equipments have surely laid a solid foundation for producing
superior products.
بم، المغلفة مسبقا المعادن، ورقة الصلب المطلي، لون المغلفة ورقة معدنية، قبل-- طلاء الصلب، بجي، ورقة الصلب، الصلب لفائف
بم هو نوع من صفائح معدنية مركب توالت مع طلاء اللون
المعادن الأساسية: 0.3 ملليمتر ~ 1.2 ملليمتر سمك المدرفلة الباردة الصلب، المجلفن الصلب، أو سبائك الألومنيوم لوحة و صفائح معدنية أخرى
فئة: ضوء بم و مات بم
مزايا الأداء: لديها طلاء ملون، مع مقاومة للاهتراء، مقاومة للتآكل، ومقاومة للنفط، وسهلة غسل وخصائص المعالجة جيدة. يمكن مطابقة اللون وفقا لمتطلبات العملاء و أيضا يمكن تلبية متطلبات العملاء ل ألوان مختلفة في فترة قصيرة نسبيا
المخطط الهيكلي: فيلم واقية
إنهاء معطف
الغطاء الاساسي
طبقة المعالجة الكيميائية
المعادن الأساسية
طبقة المعالجة الكيميائية
معطف الظهر
:المؤشرات الفنية الاساسية
بيس المعادن: وفقا لطلب الزبون:
معطف سمك: 20 ~ 25 أم سمك البوليستر الطلاء:
فيلم واقية: ذاتية اللصق حماية الفيلم
عودة معطف 3 ~ 10 أم، و يمكن طلاء موصل عودة معطف وفقا لطلب الزبون
:سوبليينغ ستات
بلات باك وفقا لطلب العملاء، عرض ≤1350 مم، طول ≤4000mm
PCM , PRE-COATED METAL, PREPAINTED STEEL SHEET, COLOR COATED METAL SHEET, PRE-PAINTED STEEL, PPGI, STEEL SHEET, STEEL COILS
PCM is a kind of compound metal sheet rolled with color coating.
Base metal: 0.3mm ~ 1.2mm thickness of cold rolled steel, galvanized steel, or aluminum alloy plate and other metal sheets.
Category: light PCM and matt PCM
Performance advantages:have colorful coating, with wear-resistant, corrosion-resistant, oil-resistant, easy-wash and good processability properties. Can match color according to customers’ requirements and also can meet customers’ demands for different colors in a relatively short period.
Structural diagram: protective film
finish coat
prime coat
chemical treatment layer
base metal
chemical treatment layer
back coat
Main technical parameters:
BASE METAL: According to customer’s request:
COAT THICKNESS : 20 ~ 25 um thickness Polyester paint:
PROTECTIVE FILM: Self-adhesive protect film
BACK COAT 3~10 um, and can paint conductive back coat according to customer’s request
SUPPLYING STATE:
PLATE PACK according to customers’ request, width≤1350 mm, length≤4000mm
:تطبيق بم الصلب
يتم استخدامه للأجهزة الكهربائية، مثل الثلاجة. غسالة؛ الميكروويف؛ DVD، الخ
Application of PCM Steel:
it is used for electric appliances, such as refrigerator; washing machine; microwave; DVD;etc.
سوف نتصل بك في غضون 8 ساعات