0.125-5.0mm : السماكة
800-1700mm:العرض
508/610mm :معرف اللفافة
Thickness: 0.125-5.0mm
Width: 800-1700mm
Coil ID: 508/610mm
:مواصفات الألواح اللفائف الفولاذية المجلفنة كهربائياً
SECC, SECD, SECE, etc:الفئة
JIS G3313-1998 ASTM 1591-98:المعايير
30g/m2-90g/m2:وزن التغليف بالزنك
معالجة السطح: الكروم،الزيتي،الفوسفات،مضادة للأصابع
المميزات:مقاومةالتآكل،قابلية اللحام،قابلية التشكيل،الدهانات المقاومة للإلتصاق
Specification of Electrogalvanized Steel Coil & Sheet:
1) Grade: SECC, SECD, SECE, etc.
2) Standard: JIS G3313-1998 ASTM 1591-98
3) Zinc coating weight: 30g/m2-90g/m2
4) Surface treatment: Chromate; Oil, Phosphate; Anti-finger.
5) Feature: corrosion resistance, weldability, formability, and paint adhesion.
:الأحجام المتاحة
6) Available Sizes:
Electro Galvanized – sheet steel in coil and cut lengths that is zinc coated by electro-deposition for a light or thin coated mass. This product is
manufactured for use as formed or miscellaneous parts where corrosion resistance is necessary as opposed to an uncoated sheet. Electro
Galvanized is not intended to withstand outdoor exposure without chemical treatment or painting. The electro-galvanized sheet is produced as
commercial quality, drawing quality, drawing quality special killed, and structural or physical quality and is readily available in three zinc coating
class weights of A, B, or C. Electro-Galvanized ASTM A-879 This specification covers the requirements for zinc coatings applied by the
electrolytic process to any grade of hot-rolled or cold-rolled steel sheets for applications requiring designation of the coating mass on each
surface. Coating application shall be done on one or both surfaces with equal or differential coating masses and similar levels of corrosion
protection, and shall have no effect on the base metal mechanical properties. The coated sheets may be available as commercial steel (CS),
drawing steel (DS), deep drawing steel (DDS), extra-deep drawing steel (EDDS), structural steel (SS), high-strength low-alloy steel (HSLAS),
high-strength low-alloy steel with improved formability (HSLAS-F), solution-hardened steel (SHS), or bake-hardenable steel (BHS). Coatings
shall be designated accordingly, and shall undergo test methods such as weigh-strip-weigh method, nondestructive X-ray fluorescence
measurement, and Coulometric method. Accordingly, individual coating designations should conform to coating weight, mass per surface, and
thickness requirements.
:الفئات الفولاذية للألواح واللفائف الفولاذية المجلفنة كهربائياً
Steel Grade of Electrogalvanized Steel Coil & Sheet:
: حزمة التعبئة والتغليف للألواح اللفائف الفولاذية المجلفنة كهربياً
تحزم منتجاتنا وفق للأنظمة والمعايير العالمية وبما يتوافق مع متطلبات العميل .سوف نبذل قصارى جهدنا لتفادي أي ضرر قد يلحق بها خلال عمليتي التخزين والترحيل ,بالإضافة إلى أن الملصقات والعلامات موضوعة بوضوح على الحزمة من الخارج من إعطاء تعريف بسيط بهوية المنتجات والمعلومات المتعلقة بالجودة
Packaging for Electrogalvanized Steel Coil & Sheet:
Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
:تطيبقات الألواح واللفائف الفولاذية المجلفنة كهربائياً
المركبات:مصافي الهواء، المرواح،خزانات الوقود والخ
التطبيقات المنزلية:تطبيقات الثلاجات،أفران المايكرويف، الطابعات،معدات مكبرات الصوت وغيرها من التطبيقات الكهربائية الأخرى
الفلاشات ، الأبواب،والإطارات HVAC الإنشاءات والبناء: مواد التزيين الداخلية و الخارجية، التسقيف،شبكة المسالك،منتجات
Application of Electrogalvanized Steel Coil & Sheet:
1) Automobiles: air filters, fans, fuel tanks, etc.
2) Home appliances: refrigerator appliances, microwave ovens, printer, stereo equipment and other electrical applications.
3) Building constructions: interior and exterior decorative materials,roofing, ductworks, HVAC products, flashing, doors, sashes, etc.
سوف نتصل بك في غضون 8 ساعات