السلك الفولاذي

السلك الملحوم

    المادة: النحاس المغلفة

     

     

     

     

    التطبيق: الجسور، السفن، البناء الصلب، إنتاج الآلات

     

    Material: copper coated


    Application: Bridges, Ships, Steel constructure,Machinery production

شنغهاي شركة المعادن وقد تم القيام بأعمال تجارية لحام الأسلاك لعقود. منتجاتها تتميز بنوعية جيدة ومتانة.






الغاز محمية الصلبة
مقدمة: JQ.MG80-G هو نوع من قوة عالية الغاز محمية أسلاك اللحام. يمكن استخدام الغاز المختلط أر + 20٪ CO2 كغاز تدريع. لديها قوس لينة، حرق مستقرة وأقل النتوءات. حبة لديها أعلى تأثير المتانة.
 
الاستخدامات: مناسبة لحام هياكل عالية القوة مع قوة الشد من 790MPa. ويمكن استخدامه لحام بعض الهياكل الرئيسية، مثل أوعية الضغط، آلات البناء، آلات الرفع، السفن، آلات التعدين، الخ.
التركيب الكيميائي لأسلاك اللحام (٪)


:تعليمات
1. ذي البقع النفط والصدأ على ويلدمنتس يجب مسح بعيدا.
2. عندما لحام، معدل تدفق الغاز عموما 20 ~ 25l / دقيقة.
3. عند لحام مع تدفق محفور أسلاك اللحام، تمديد استطالة ينبغي 15 ~ 25 ملليمتر.
4. الرطوبة من أسلاك اللحام يجب الحفاظ على مخازن أقل من 60٪.
5. انها ليست مناسبة لغير-- فراغ-- معبأة أسلاك اللحام ليتم تخزينها لأكثر من نصف سنة، وأنها ليست مناسبة لفراغ-- معبأة أسلاك اللحام ليتم تخزينها لأكثر من سنة.



Shanghai Metal Corporation has been doing business for welding wire for decades. Its products features good quality and durability. 


Gas-shielded Solid
Introduction: JQ.MG80-G is a kind of high strength gas-shielded welding wire. The mixed gas Ar+20% CO2 can be used as shielding gas. It has soft arc, stable burning and fewer spatters. The bead has higher impact toughness.
 
Uses: Suitable for welding high strength structures with tensile strength of 790MPa. It can be used for welding some key structures, such as pressure vessels, construction machinery, hoisting machinery, ships, mining machinery, etc.
Chemical Composition of Welding Wire(%)

 


Examples of Chemical Composition of Deposited Metal (%)

 

Mechanical Properties of Deposited Metal

 

Reference Current (DC+)
Instructions:
1. The impurity content in the shielding gas should be strictly controlled to guarantee the purity of gas.
2. When welding, the gas flow rate is generally 20~25L/min.
3. The extension elongation should be 15~25mm.

 

Argon-arc Welding Wire

JQ.TG50   

According with GB ER50-6

Corresponding with AWS  ER70S-6

 

Uses: Used for all-position manual tungsten argon arc backing weld and arc welding on pipelines, and both can produce satisfactory welded joints. Able to be used for welding carbon steel and some low-alloy steel.

Chemical Composition of Welding Wire(%)

 

Examples of Chemical Composition of Deposited Metal (%)

 

 

Mechanical Properties of Deposited Metal

 

 

Wire Size

 

Submerged-arc Welding Wire

JQ.H10MnSi

GB:H10MnSi

AWS:EM13K

Current:Used together with fused flux 350 or sintered flux 101. Used for both high speed welding and filling welding on 50kg class base metals. Mostly used for welding boilers, pressure vessels, bridges, ships, etc.

Main Applications: 

JQ.H10MnSi

According with GB H10MnSi

Corresponding with AWS  EM13K 

Introduction: It is a kind of welding wire with appropriate manganese and silicon content. It matches with low-manganese and low-silicon type welding flux. It is not sensitive to the rust on the base metal. It has excellent bead molding, excellent slag detachability and high welding efficiency.

 

Uses: Used together with fused flux 350 or sintered flux 101. Used for both high speed welding and filling welding on 50kg class base metals. Mostly used for welding boilers, pressure vessels, bridges, ships, etc..

Chemical Composition of Welding Wire(%)

 

 

Mechanical Properties of Deposited Metal

 

Wire Size

 

Gas-shielded Flux-cored Welding Wire
JQ. YR302
GB:E551T1-B2
AWS:E81T1-B2
Current:Suitable for welding 1Cr0.5Mo (such as 15CrMo) steel below 520
Main Applications:
JQ.YR302
According with GB/T 17493-1998 E551T1-B2
Corresponding with AWS A5.29 E81T1-B2
JIS Z3318 YF1CM-C
 
Uses: Suitable for welding 1%Cr-0.5%Mo (such as 15CrMo) steel below 520℃.
Chemical Composition of Deposited Metal (%)(CO2Shielding Gas)

Mechanical Properties of Deposited Metal

Reference Current (DC+)

 

Instructions:
1.The oil stains and rust on the weldments should be cleared away.
2.When welding, the gas flow rate is generally 20~25L/min.
3.When welding with flux-cored welding wires, the extension elongation should be 15~25mm.
4.The humidity of the welding wire storerooms should be preserved below 60%.
5.It is not suitable for non-vacuum-packed welding wires to be stored for more than half a year, and it is not suitable for vacuum-packed welding wires to be stored for more than a year.

 

الغاز محمية تدفق محفور أسلاك اللحام

 

JQ. YR302

 

GB: E551T1-B2

 

AWS: E81T1-B2

 

الحالي: مناسبة لحام 1Cr0.5Mo (مثل 15CrMo) الصلب أدناه 520

 


:التطبيقات الرئيسية

 

JQ.YR302

 

وفقا مع غب / T 17493-1998 E551T1-B2

 

المقابلة مع أوس A5.29 E81T1-B2

 

جيس Z3318 YF1CM-C

 

 

 

الاستخدامات: مناسبة لحام 1٪ كر-0.5٪ مو (مثل 15CrMo) الصلب أدناه 520 ℃.

 

 

التركيب الكيميائي للمعادن المودعة (٪) (CO2Shielding غاس)

Gas-shielded Flux-cored Welding Wire

JQ. YR302

GB:E551T1-B2

AWS:E81T1-B2

Current:Suitable for welding 1Cr0.5Mo (such as 15CrMo) steel below 520

Main Applications: 

JQ.YR302

According with GB/T 17493-1998 E551T1-B2

Corresponding with AWS A5.29 E81T1-B2

JIS Z3318 YF1CM-C

 

Uses: Suitable for welding 1%Cr-0.5%Mo (such as 15CrMo) steel below 520℃.

Chemical Composition of Deposited Metal (%)(CO2Shielding Gas)

 

 

Mechanical Properties of Deposited Metal

 

Reference Current (DC+)

 

Instructions:

1.The oil stains and rust on the weldments should be cleared away.

2.When welding, the gas flow rate is generally 20~25L/min.

3.When welding with flux-cored welding wires, the extension elongation should be 15~25mm.

4.The humidity of the welding wire storerooms should be preserved below 60%.

5.It is not suitable for non-vacuum-packed welding wires to be stored for more than half a year, and it is not suitable for vacuum-packed welding wires to be stored for more than a year.

:التعبئة والتغليف من أسلاك اللحام

 

شنغهاي المنتجات المعدنية هي معبأة المنتجات و المسمى وفقا للوائح و طلبات العملاء.

 

تؤخذ عناية كبيرة لتجنب أي ضرر قد يكون سبب أثناء التخزين أو النقل.

 

وبالإضافة إلى ذلك، يتم وضع علامات على تسميات واضحة على الخارج من الحزم لسهولة تحديد المنتج I. D. ونوعية المعلومات.

 

1) سمك القياسية

 

 

2) التخصيص

 

Packaging of Welding Wire:

Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests.

Great care is taken to avoid any damage which might be caused during storage or transportation.

In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

1)SMC Standard 

2)Customization

 

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح