آلة التعويج

ماكينة لف مواسير وقطاعات معدنية

     

    8mm: أقصى حد لسماكة الثني

    المواد المناسبة:الفولاذ الكربوني، الفولاذ المقاوم للصدأ، النحاس

    مناسبة لتشكيل:الأشرطة،للقطاعات التركيبة,المواسير

    Max bending thickness: 8mm

     

    Suitable material: carbon steel, stainless steel, aluminium, copper

     

    Suitable form: strip, section structure, pipe

تفاصيل المنتج

: مقدمة تعريفة وتطبيقات  ماكينة لف مواسير وقطاعات معدنية

 تعرف ماكينة لف المواسير والقطاعات المعدنية  أيضاً بماكينة اللف المقطعي، ماكينة الدرفلة الثلاثية، ماكينة لف الزوايا بالدرفلة وأحيانا تسمى أيضاً بماكينة لف المواسير أو الانابيب،قابلة للتطبيق في الصناعات أدناه

في نطاق واسع من عمليات الثني

السيارات

الزراعة

في بناء هياكل الباصات

الأثاثات

الزخرفة

هياكل المباني

النوافذ

هياكل الأبواب

النوافذ السقفية والخ


إن ماكينة لف مواسير وقطاعات معدنية خاصتنا مزودة بإثنان من  أزرار بكرات التشغيل المعدلة وبكرة تشغيل علوية يتم ضبطها يدوياً.

. بكرات التشغيل الموجه يتم تزويدها بالطاقة من قبل محرك توجيه كهربائي ثنائي الإتجاه مع مخفض تروس.هذه الماكينات بسيطة وسهلة الإستخدام ومتاحة في الإستثمارات المبدئية والخدمات العادية

Introduction and applications of Section Bending Machines:
Section Bending Machines are also known by the names such as Profile Bending Machine, Three Roll Bender, Angle Roll Bending Machine, sometime even by names Tube Bending or Pipe Bending Machine; having applications in the following Industries for wide range of Curving or Bending operations. 

1. Automobiles 
2. Agriculture 
3. Bus body building 
4. Furniture 
5. Ornamental 
6. Structural buildings 
7. Window 
8. Door frames 
9. Skylight, etc… 

Our Lines of Section Bending Machine are Equipped with Two Fixed Bottom Driving Rolls and One Top Roll which is Manually Adjusted. The Bottom Driving Rolls are powered by a Bi-Directional Electric Drive Motor Coupled with Gear Reducer. These Machines are simple and Easy to Use and Affordable both in the Initial Investment and Ordinary Service. 


:مميزات ماكينة لف المواسير والقطاعات المعدنية

إدارة المحرك للأسطوانتين السفليتين

مجموعة أسطوانات معيارية

عمود دوران حللزوني صلب ودقيق

موجهات جانبية قابلة للضبط

موقِف للطوارئ

دواسة قدم لتدوير الأيمن والأيسر،خيار مشغل عكسي

الضبط اليدوي للأسطوانة العلوية

أسطوانات صلبة للمقاطع المعيارية

Features of Section Bending Machines: 

•Motorized Drive of both Bottom Rolls. 
•Standard Roll Set. 
•Hardened Precision Threaded Shaft. 
•Adjustable Lateral Guides. 
•Emergency Stop. 
•Foot Pedal for Right and Left Rotation, Option of Reverse-Forward Starter. 
•Manual Adjustment of Upper Roll. 
•Hardened Rolls for Standard Profile. 
•Easy and Quick Roll Change. 
•Scale for Clear Adjustment of Top Roll. 
•All Shafts Run in Roller Bearings. 
•The Machine Frame is Welded Steel Construction. 
•Heavy Duty and Rigid Construction 
•Machine can be operated by Semi-Skilled or Unskilled Operator. 
These machines can bend wide range of structural steel section, Flat bars, Solid Square or Round, Angle Iron (Leg In or Out), Round Tube, Square Tube, Rectangular Tubing.

:تصنيفات ماكينة لف المواسير والقطاعات المعدنية

ماكينة لف المواسير والقطاعات المعدنية بواسطة بنظام الهيدروليك

اللفافة الأفقية للقطاعات

اللفافة العمودية للقطاعات

Classifications of Section Bending Machines: 

1.Hydraulic Section Bending Machine 

2.Horizontal Section bender 

3.Vertical Section bender 

 

:مواصفات ماكينات لف المواسير والقطاعات المعدنية

 التركيب:إن ماكينة  لف القطاعات المعدنية خاصتنا ركبيت على شكل نوع ماكينة الإهرامية متعددة الوظائف والتي تستخدم على نحو واسع في محلات التصنيع.لديها 2 بكرة توجيه الطاقة مع أعمدة دوران معدلة.البكرة الثالة قابلة للضبط على حسب المسافة من البكرات المعدلة

.من أجل سهولة التشغيل فأن ضبط البكرة الثالثة يتحكم فيه بواسطة  مشغل كهربائي وزر كبس 

الموجه:الموجه الرئيسي وبكرات عمود الدوران المعدل عبر سعة تروس عالية

الهيكل:الهيكل الرئيسي للماكينة لف المواسير والقطاعات المعدنية تمتلك هيكل قوي ومنيع.صممت على نحو معقول بمكونات متناسق ومعزز

.التحكم: من أجل تشغيل  ومراقبة سهلة،إن نظام التحكم الكهربائي يكون في الجزء الجانبي من الماكينة.إن الدوائر الكهربائية المعيارية تتكون من من متحكم  محول عكسي

.يتحكم محرك اللف في نقل اللف، القاطع الحديدي مصباح المؤشر.سطح منفصل مركب على لوحة الضبط التي هي متاحة مع إي طلب محدد.للف أي قطعة عمل سمكية كانت أو رفيعة إن موجه الطاقة مضبوط لذلك ومتاح مع الطلب المذكور أعلاه

التشغيل والصيانة:

إن ماكينة لف المواسير والقطع المعدنية خاصتنا مكونة من تركيب قوي لذلك فهي سهلة الحفاظ عليها.تشغيل الماكينة سهل وسريع مما يمكنك من اللف والثني المتوسط

Specifications of Section Bending Machines: 

1. Construction: Our Section Bending Machine has been constructed in the form of a versatile pyramid type machine and is widely used in fabrication shops. It has two power driven rolls with fixed axes. The third roll is adjustable as to its distance from the fixed rolls. For easy operations, the third roll adjustment is power actuated and push button controlled.

2. Drive: The main drive to fixed axis rolls is through a high capacity gearbox. 

3. Frame: The main frame of our Section Bending Machine is an extremely robust and strong structure. It is properly designed with well-proportioned members and reinforcements. 

4.Controls: For easy operation and supervision, the electric control panel is mounted on the side of the machine. The standard electrical circuit consists of forward-reverse control. Bending motor controls roll travel, limiting switch and indicator lamps. A separate floor mounted control panel is available as per specific requirement. For bending very small or thin walled work piece a power driven adjustable roll is available upon request. 

5.Operation and maintenance: Our Section Bending Machines are of sturdy construction so they are very easy to maintain. Operation of the machine is simple and fast to help you achieve accurate coiling and bending with minimum effort.

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح