310mm, 480mm, 520mm, 535mm etc. : عرض العنصر
Element width: 310mm, 480mm, 520mm, 535mm etc.
1.0mm, 1.2mm etc. :سمك العنصر
Element thickness: 1.0mm, 1.2mm etc.
500-4000mm :مسافة المركز
Central distance: 500-4000mm
الزعانف المبردة هو عنصر التبريد الاساسي من قدرة المحولات الخاصة
الكثافة العالية في الزعانف المبردة مصنعة من قبل ماكينة تخريم تلقائية ,التئ تجمع مابين اسقاط الخياطة والحام وقطع الاطراف
. الحامية لعمل الاتصال مابين العنصر وانبوب الزيت CO2 الملفوفة بي الحديد الصلب البارد عالي الجودة ,نحن نستعمل في الخارج منتجات ثاني اكسيد الكربون
هاذا الاسلوب يمكن ان يجنب بقايا الحام ونثرات الحديد عن طريق عمل لحام داخلي الذي بي امكانها التاثير علئ اداء نقل الحرارة وجودة المبرد
كما ان الزعانف المبردة يتم فحصها بدقة عالية عن طريق فحص الختم وزيت التنضيف الحارق ,كم انه يتم جلفنة وطلاء السطح بجلفان وطلاء حار وعميق
لضمان جودة المنتج
عندما تم اختبارها من قبل الطرف الثالث معهد التفتيش JB/T5347وBS-EN 50216-6 الزعانف المبردة تماما تلتقي مع صناعة المحول بمعاير
Finned radiator is the main cooling component of the power transformers and special transformers.
The high efficiency finned radiator’s cooling element is manufactured by automatical punching, combining, drop sew-welding and edge cutting
with high quality cold rolled steel sheets. We use outside CO2 protection welding to do the connection between elements and oil collection pipe.
This technique could avoid the welding residue or iron scrap produced by inner welding, which will affect the heat transfer performance and
quality of the radiator. Also the finned radiator will be strictly checked with sealing test and hot oil flushing, its surface with hot-dip galvanizing and
painting, to guarantee the product quality.
The finned radiator fully meets the transformer industry standard JB/T 5347 and BS-EN 50216-6 when tested by third-party inspection institute.
:خصائص نقل الزعانف المبردة
310mm, 480mm, 520mm, 535mm etc: عرض العنصر
1.0mm,1.2mm etc. : سماكة العنصر
500-4000mm: مسافة المركز
.مجموع انابيب الزيت
88.9mm(3.5inch)x4mm, 114.3mm(4.5inch)x4.5mm
Specfication of Finned Radiator for Transformer:
Element width:310mm, 480mm, 520mm, 535mm etc.
Element thickness: 1.0mm,1.2mm etc.
Central distance:500-4000mm
Oil collection pipe:
88.9mm(3.5inch)x4mm, 114.3mm(4.5inch)x4.5mm
:نوع الهيكل
(من دون حافة الانبوبه -PG) هيكل ثابت نوع
(مع حافة الانبوب-PC ) للفك نوع
السطح الخارجي :جلفان حار وعميق ,طلاء بودر
Structure type:
(1) fixed(PG type, without flange)
(2) demountable(PC type, connected with flange)
External surface: Hot-dip galvanized, powder coating
:شكل المبرد
Radiator type:
:المعايير التقنية والعرض للعنصر النموذجي
310mm متثابتة ونوع الصفيحة المبردة
Technical parameters for typical element widths:
Parameters of 310mm plate type radiator:
480mmمتثابتة ونوع الصفيحة المبردة
Parameters of 480mm plate type radiator:
520mmمتثابتة ونوع الصفيحة المبردة
Parameters of 520mm plate type radiator:
:550mmمتثابتة ونوع الصفيحة المبردة
Parameters of 550mm plate type radiator:
:تعليمات وتوجيهات كيفيه نقل وتركيب الزعانف المبردة
Instructions & Installation of Finned Radiator For Transformer:
سوف نتصل بك في غضون 8 ساعات