المعادن للأجهزة المنزلية

ضغط الربيع للدراجات

     0.1-mm 80: قطر السلك

     

     

     

    ISO, GB, DIN, JIS, ANSI, BSW :اساسي

     

     

     

     

    المواد: ربيع الصلب، الفولاذ الصلب، الكربون الصلب، سبائك الصلب

    Wire Diameter: 0.1-80mm

     

    Standard: ISO, GB, DIN, JIS, ANSI, BSW 

     

    Material: Spring Steel, Stainless Steel, Carbon Steel, Alloy Steel

تنتج شركة شانغاي ميتال كوربوراتيون الينابيع ذات قطر السلك من 0.1 مم إلى 80 مم. منتجاتنا تشمل الينابيع الضغط، الينابيع تمديد، الينابيع التواء، الينابيع بليفيل، الينابيع لولبية، الينابيع موجة، يموت الينابيع، شكل الينابيع اللكم واللكم المكونات.


مواصفات الربيع ضغط:
قطر السلك: 0.1-80mm
معيار: إسو، غب، دين، جيس، أنسي، بسو
المواد: ربيع الصلب، الفولاذ الصلب، الكربون الصلب، سبائك الصلب


ضغط الربيع هي الينابيع حلزونية مفتوحة لفائف الجرح أو شيدت لمعارضة ضغط
على طول محور الرياح. حلزوني ضغط الينابيع هي التكوين الربيع المعدن الأكثر شيوعا.
عموما، يتم وضع هذه الينابيع لفائف على قضيب أو تركيبها داخل حفرة.
عند وضع الحمل على ضغط لفائف الربيع، مما يجعلها أقصر،
فإنه يدفع مرة أخرى ضد الحمل ويحاول أن نعود إلى طوله الأصلي.
الينابيع الضغط تقدم مقاومة لقوى الضغط الخطية) دفع)
وهي في الواقع واحدة من أكثر كفاءة أجهزة تخزين الطاقة المتاحة.

Shanghai Metal Corporation produces springs with wire diameter from 0.1 mm to 80 mm. Our products include compression springs, extension springs, torsion springs, Belleville springs, spiral springs, wave springs, die springs, wire form springs and punching components.


Specifications of Compression Spring :
Wire Diameter: 0.1-80mm

Standard:ISO, GB, DIN, JIS, ANSI, BSW
Material: Spring Steel, Stainless Steel, Carbon Steel, Alloy Steel


COMPRESSION SPRINGS are open-coil helical springs wound or constructed to oppose compression 

along the axis of wind. Helical Compression Springs are the most common metal spring configuration. 

Generally, these coil springs are either placed over a rod or fitted inside a hole. 

When you put a load on a compression coil spring, making it shorter, 

it pushes back against the load and tries to get back to its original length. 

Compression springs offer resistance to linear compressing forces (push), 

and are in fact one of the most efficient energy storage devices available.


:تكوينات

 

الربيع ضغط الأكثر شيوعا، مستقيم لفائف معدنية الربيع، لديه نفس القطر لكامل طول. خيارات التكوين الأخرى للضغط الينابيع لفائف تشمل الرملية (مقعرة)، مخروطي وبرميل (محدب) أنواع. التكوين لفائف الربيع على التوالي هو نوع لفائف القياسية لضغط الأسهم الينابيع.

 

:ينتهي

 

كل لي الربيع الأسهم ضغط الأسهم الينابيع، باستثناء بنتام ميني الينابيع، سلسلة الأجهزة ضغط الأسهم الربيع وضغط لايت ™ ضغط الأسهم الربيع سلسلة، ميزة التربيع والأرضية. النهايات الأرضية توفر الطائرات المسطحة والاستقرار. يؤثر التخويف على كيفية تحويل قوة المحور التي ينتجها الربيع إلى الأجزاء المجاورة. على الرغم من أن نهايات مفتوحة قد تكون مناسبة في بعض التطبيقات، نهايات مغلقة تحمل درجة أكبر من تربيع. الينابيع الأسهم ضغط ونهاية الأرض مفيدة بشكل خاص في التطبيقات التي 1) يتم تحديد الينابيع عالية واجب، 2) التحمل وثيق على غير العادة على الحمل أو معدل هناك حاجة 3) يجب أن يكون الحد الأدنى الصلب، 4) هناك حاجة إلى ضغوط و 5) يجب تخفيض الميل نحو التواء.

 

:المعلمات الرئيسية

 

الأبعاد: القطر الخارجي، القطر الداخلي، قطر السلك، طول الحرة، وارتفاع الصلبة

 

طول الحرة هو الطول الكلي للنبع في موقف تفريغ

 

 

الصلبة الارتفاع هو طول الربيع ضغط تحت تحميل كافية لجلب جميع لفائف في اتصال مع لفائف المجاورة

Configurations:

The most common compression spring, the straight metal coil spring, has the same diameter for the entire length. Other configuration options for compression coil springs include hourglass (concave), conical and barrel (convex) types. The straight coil spring configuration is the standard coil type for Stock Compression Springs.

Ends:

All Lee Spring Stock Compression Stock Springs, except BANTAM Mini Springs, Instrumentation Series Compression Stock Spring and Lite Pressure™ Compression Stock Spring Series, feature squared and ground ends. Ground ends provide flat planes and stability. Squareness influences how the axis force produced by the spring can be transferred to adjacent parts. Although open ends may be suitable in some applications, closed ends afford a greater degree of squareness. Squared and ground end compression stock springs are particularly useful in applications in which 1) high-duty springs are specified, 2) unusually close tolerances on load or rate are needed, 3) solid height must be minimized, 4) accurate seating and uniform bearing pressures are required and 5) a tendency towards buckling must be reduced.

Key Parameters:

Dimensions:Outer Diameter, Inner Diameter, Wire Diameter, Free Length, and Solid Height.

Free Length is the overall length of a spring in the unloaded position.

Solid Height is the length of a compression spring under sufficient load to bring all coils into contact with adjacent coils.

:التعبئة والتغليف من الربيع ضغط

 

شنغهاي المنتجات المعدنية هي معبأة المنتجات و المسمى وفقا للوائح و طلبات العملاء

 

تؤخذ عناية كبيرة لتجنب أي ضرر قد يكون سبب أثناء التخزين أو النقل

 

 

وبالإضافة إلى ذلك، يتم وضع علامات على تسميات واضحة على الخارج من الحزم لسهولة تحديد المنتج I. D. ونوعية المعلومات

Packaging of Compression Spring:

Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests.

Great care is taken to avoid any damage which might be caused during storage or transportation.

In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

(معدل الربيع (تصلب

 

معدل الربيع هو التغيير في الحمولة لكل وحدة انحراف في جنيه لكل بوصة (ib / in)في.) أو نيوتن لكل ملليمتر (N /mm)

 

وحدة التدابير

 

يتم تحديد الينابيع الربيع لي الربيع في كل من اللغة الإنجليزية (الإمبراطوري) وحدات متري. تأكد من تحديد وحدة القياس المفضلة عند البحث عن ربيع الأسهم باستخدام محركات البحث لي سبرينغ

 

:ضغط عصبى

 

 

الأبعاد، جنبا إلى جنب مع متطلبات الحمل والانحراف، وتحديد الضغوط في الربيع. عندما يتم تحميل الربيع ضغط، يتم تأكيد الأسلاك الملفوفة في التواء. الضغط هو أعظم على سطح السلك. كما انحرف الربيع، يختلف الحمل، مما تسبب في مجموعة من الإجهاد التشغيل. الإجهاد ومدى الإجهاد يحكم حياة الربيع. كلما زاد نطاق الضغط، كلما كان الحد الأقصى للإجهاد يجب أن يكون للحصول على حياة مماثلة. ويمكن استخدام الضغوط العالية نسبيا عندما يكون نطاق الضغط منخفضا أو إذا كان الربيع يتعرض لأحمال ثابتة فقط. يجب أن يكون الإجهاد عند الارتفاع الصلب مرتفعا بما فيه الكفاية للسماح بالإعداد المسبق، ولكن منخفض بما فيه الكفاية لتجنب الأضرار الدائمة لأن الينابيع غالبا ما تكون مضغوطة أثناء التثبيت

Spring Rate (stiffness)

Spring Rate is the change in load per unit deflection in pounds per inch (lb. /in.) or Newtons per millimeter (N/mm).

Unit of Measures

Lee Spring's Stock Springs are specified in both English (Imperial) or metric units. Be sure to specify the preferred unit of measure when looking for a Stock Spring using Lee Spring's search engines.

Stress:

 The dimensions, along with the load and deflection requirements, determine the stresses in the spring. When a compression spring is loaded, the coiled wire is stressed in torsion. The stress is greatest at the surface of the wire; as the spring is deflected, the load varies, causing a range of operating stress. Stress and stress range govern the life of the spring. The higher the stress range, the lower the maximum stress must be to obtain comparable life. Relatively high stresses may be used when the stress range is low or if the spring is subjected to static loads only. The stress at solid height must be high enough to permit presetting, yet low enough to avoid permanent damage since springs are often compressed solid during installation.

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح