الآلات الأخرى

خزان الخبث

    المواد: يلقي الصلب

    Material: cast steel

.وعاء الخبث هو جهاز حاملة الغرض الوحيد منه هو جمع الخبث المنصهر أو الصلب المتولد أثناء العمليات المعدنية أو الكيميائية، والاحتفاظ به أثناء النقل وإيداعه في مكان التخلص منه

:الخبث وعاء المواد
.مصنوعة الأواني الخبث من الصلب المصبوب، وسوف نقدم مواصفات المواد كما كنت المطلوبة



تصميم الخبث وعاء

الأواني الخبثية هي عناصر حاسمة لأنها جزء من معدات الرفع وبالتالي تخضع من حيث هندسة التصميم الميكانيكي والتعامل مع السلامة الوطنية


:لوائح الدولة التي يفترض أن يتم تشغيلها. وبالتالي، يجب مراعاة معايير التصميم التالية
نوع الفرن الذي سوف وعاء الخبث الخدمة
كمية ونوع الخبث ولدت،
طريقة التعامل مع وإلقاء وعاء،
تأثير الحرارة أثناء العملية،
القيود الأبعاد،
إجراءات صيانة وعاء

Slag pot is a load-bearing device whose sole purpose is to collect molten or solid slag generated during metallurgical or chemical processes, to retain it during 

transport and to deposit it at a place of disposal. 



Slag pot material:

Slag pots are made from Cast Steel, we will offer the material specification as you required. 


Standard Specifications for Cast Steel



Slag pot design
Slag pots are crucial items as they are part of lifting equipment and therefore undergo in terms of mechanical design engineering and handling the national safety

regulations of the state where they are supposed to be operated. Thus, the following design criteria must be taken into consideration:
Type of furnace that the slag pot will service
Quantity and type of slag generated,
Method of handling and dumping the pot,
Heat impact during operation,
Dimensional restrictions,
Pot maintenance procedures


عملية إنتاج وعاء الخبث

 

1.نمط خشبي الإنتاج

 

2. صب

 

3. صب

 

4. التنظيف الأول

 

5. المعالجة الحرارية - طحن (التفتيش)

 

6. الخام الآلات (التفتيش) -التشطيب بالقطع (التفتيش)

 

 

7. التعبئة-- تسليم

 

 

Slag pot production Process 

1. Wooden pattern Production  

2. Molding

3. Pouring

4. First cleaning

5. Heat treatment – grinding (inspection)

6. Rough machining (inspection)-finishing machining (inspection)

7. Packing-delivering

الخبث ضمان الجودة وعاء

 

يخضع مسار التصنيع لأحكام نظام الجودة المطبق إسو 9001: 2000. تضمن الوثائق القياسية التتبع الكامل لكل خطوة عملية

 

 شهادات اختبار المصنع وفقا للفقرة 3.1 من دين إن 10.204 بما في ذلك التركيب الكيميائي والخصائص الميكانيكية والفحص غير المدمر؛

 

 التحقق من الأبعاد المدعومة مع رسم "كما بنيت"؛

 

. سجل مخطط المعالجة الحرارية

 

 

الأواني الخبث المصممة من قبل سمك تتوافق مع متطلبات أبعاد الهيكل والخواص الميكانيكية وضمان من خلال التركيب الكيميائي، المعالجة الحرارية، والاختبار غير المدمرة والتفتيش البصري ضد السطح

 

Slag pot quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:

• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;

• Dimensional check supported with a “as-built“ sketch;

• Record of the heat treatment chart;

Slag pots designed by SMC comply with the requirements of structure dimensions, mechanical properties and guarantee by chemical composition, heat treatment, non-destructive testing and visual inspection against surface.

تنقر هنا للحصول على السعر
انقر
هنا
ل
السعر

سوف نتصل بك في غضون 8 ساعات

* البريد الإلكتروني:Double check your email address, maybe you have spelling mistakes, thanks.
* اسم الشركة:
البلد:
* التفاصيل:
 التحميل: التصفح